Henan Jinzhen Boiler Company
Jinzhen Boiler, steam boiler experts!
Add to Cart
Free Installation! Packaged Type Natural Gas Fired Thermal Oil Boiler Heater With Italy Burner
YY(Q)W series thermal fluid boiler heater has skid-mounted design and full automatic control system. The heat carrier is thermal fluid oil, boiler's working pressure ≤1.0MPa, working temperature ≤310℃. Adopting three-pass structure, 3 layer corrugated coil rings.
Technique data:
Rated thermal power is 0.12Mw (10×104kcal/h) to 14Mw (1200×104kcal/h).
Design pressure is equal to or greater than 1 Mpa.
Operating temperature is equal to or less than 350°C.
Thermal efficiency is between 60% and 85% according to the difference of boiler type.
Free-Installation
The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.
Thermal Oil Boiler For Hot Press takes diesel, gas, town gas as fuel. Three pass and wet back structure enhance it's thermal efficiency and lower flue gas temperature. Thicker insulated material layer makes radiating at minimum limit.
All boilers are assembly structure which is easy for installation by just connecting system device by pipes. Intelligent system control makes boiler operation easier and more simple. Controller with imitation screen display has auto igniting, burning, circulation pumps control, alarm, etc. functions.
performance characteristics:
1, larger coil combustion chamber can make the combustion in low temperature and reduce the nitrogen oxides emissions with the characters of energy saving and environmental protection.
2, the thermal oil heater structure increases the thermal efficiency. And the high-density ring tube design structure can also reduce the occupation space.
3. The reasonable circulation section structure of multi-pass heat transfer ensure the thermal oil flow load uniform and the operation stable
4, complete control system with warning system, easy operation, safe operation.
5. Spiral coil inside and outside the furnace is composed of many small diameter tube with the advantage of good performance thermal expansion and low pressure.
6, The output (oil) temperature can be accurately controlled. Medium temperature, pressure and smoke temperature protection can also be controlled.
The thermal oil heaters in assembly structure is easy for installation by just connecting system devices. Intelligent control system makes heater operation control easy. Controller with screen display has auto igniting, burning, circulation pumps control, alarm and other control functions.
Thermal oil boiler are insulated with rock wool, whose thickness of which is 100 mm to minimize heat loss and the rock wool is covered with embossed metal sheet, whose thickness of which is 0.8 mm.
Technical parameter
| Model | Rated power(KW) | Design pressure (Mpa) | Medium outlet temperature(℃) | Thermal efficiency (%) | Overall dimension L×W×H (mm) | Reference weight (t) |
| YY(Q)W-120Y(Q) | 120 | 1.1 | ≤350 | 75 | 1600×1020×1520 | 1.5 |
| YY(Q)W-1000Y(Q) | 1000 | 1.1 | ≤350 | 85 | 3300×1670×2486 | 5 |
| YY(Q)W-2400Y(Q) | 2400 | 1.1 | ≤350 | 85 | 5080×2200×3180 | 9.8 |
| YY(Q)W-3000Y(Q) | 3000 | 1.1 | ≤350 | 85 | 5983×2420×3404 | 15.5 |
| YY(Q)W-4700Y(Q) | 4700 | 1.1 | ≤350 | 85 | 7285×2570×3760 | 21.5 |
| YY(Q)W-6000Y(Q) | 6000 | 1.1 | ≤350 | 85 | 7800×3050×3800 | 25 |
| YY(Q)W-7000Y(Q) | 7000 | 1.1 | ≤350 | 85 | 8200×3050×3800 | 27.5 |
| YY(Q)W-10000Y(Q) | 10000 | 1.1 | ≤350 | 85 | 10000×3500×4000 | 32 |
| Notes: Parameter is for reference only,if any changes should follow actual drawings. | ||||||
The Gas/Oil Fired thermal oil boiler auxiliaries :
oil fired thermic fluid heater hot oil boiler
| Name | Quantity(unit/piece) |
| main body of thermal oil boiler | 1 |
| Oil Circulating pump | 1 |
| Gas/oil burner | 1 |
| oil filling pump | 1 |
| Filter | 1 |
| Electric control cabinet | 1 |
| high level oil storage tank | 1 |
| Low level oil storage tank | 1 |
| Valves and gauges | one batch for whole system |
| Application of thermal oil boiler | |
| Chemical: | polymerization, condensation, distillation, concentration, evaporation, fusion |
| Fat: | decomposition, deodorization, distillation of aliphatic acid, heating, hydrogenation,esterification. |
| Petrochemical: | rectification, heating, thermal insulation |
| Plastic&Rubber: | hot-press, calender, extrusion, vulcanization molding, artical leather manufacture |
| Textile staining: | heat setting, dry, curing |
| Fiber: | polymerization, fusion, mould pressing, thermosetting, extension, dry |
| Carbon: | bitumen fusion, dripping, mixing,molding |
| Wood: | veneer, MDPE,HDPE,lamination flooring,birch hot-pressing, drying |
| Metal: | pickling, electroplate, coating, oil bath, heat-treatmen |
| Coating: | basting and drying, vehicle, plane, hot forming, hyperthermia bonding, drying |
| Construction: | highway hitumen, dissolving, thermal insulation |
| Cement: | fuel heating |
| Electric: | resin impregnation, melting&holding |
| Air-condition: | radiant heating |
| Others: | different application of high temperature heat source below 350°C. |
FAQ
What is the highest temperature that thermal oil heater could achieve?
thermal oil heater can reach as high as 330℃, and working under low pressure (<1.0MPa)
What are the heat-resistance temperature of grate and furnace?
The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100℃, and the lower temperature could be 700℃.
The highest heat resistance temperature of furnace could be about 1700℃~1800℃.
What is conduction oil/ hot oil / heat transfer fluid?
Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350℃, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.